Blog

How to Get Rid of Crawl Space Mold for Good in Raleigh

To get rid of crawl space mold for good, you have to remove the mold and fix the moisture that let it grow. Cleaning alone rarely lasts. The EPA puts it simply: "the key to mold control is moisture control." In practice that means finding the water or humidity source, removing the mold, and then keeping the crawl space dry with sealing, a vapor barrier, drainage or a dehumidifier.

Step 1: Find the moisture source

Common sources under Triangle homes include humid outside air coming through vents, water pooling after heavy rain, plumbing leaks, poor grading or gutters, and damp soil with no vapor barrier.

Step 2: Remove the mold

Mold on wood framing may be removed with soda blasting or other treatments, depending on the material. Damaged insulation is usually removed. The EPA advises that for mold covering more than about 10 square feet, homeowners should consult its guidance for larger cleanups, and many choose a professional. Crawl Space Ninja of Raleigh provides crawl space mold removal across the Triangle.

Step 3: Dry the space and keep it dry

The EPA recommends keeping indoor humidity below 60 percent, ideally 30 to 50 percent. In a crawl space, that is usually done with a combination of:

  • A vapor barrier over the soil and walls
  • Sealing vents and gaps
  • A crawl space dehumidifier
  • Drainage if water collects

That keep-dry work is crawl space encapsulation, which is not the same as mold removal. For a side-by-side of the two, read Crawl Space Encapsulation vs. Mold Remediation. For what drives the scope of an encapsulation project, see How Much Does Crawl Space Encapsulation Cost in North Carolina?

Step 4: Check it over time

Watch for musty smells, condensation on ducts, or new staining. If those signs return, the moisture source may still be active and should be addressed again.

What does not last

  • Spraying bleach on wood and leaving the moisture in place
  • Laying plastic without sealing vents or controlling humidity
  • Running a fan without addressing the water source

Frequently asked questions

Can I remove crawl space mold myself?

Small areas can sometimes be cleaned by homeowners. The EPA suggests consulting its larger-cleanup guidance when mold covers more than about 10 square feet. Either way, the moisture source must be fixed or mold returns.

Why does crawl space mold keep coming back?

Because the moisture is still there. Humid air, standing water or leaks keep feeding new growth.

What humidity should a crawl space be?

The EPA recommends indoor humidity below 60 percent, ideally 30 to 50 percent. A dehumidifier and sealing are common ways to stay in that range.

Who removes crawl space mold in Raleigh?

Crawl Space Ninja of Raleigh, owned by Chris and Jessica Jackson, provides crawl space mold removal and moisture control across Raleigh, Holly Springs, Cary, Apex and Morrisville. Call (919) 533-5666.

Schedule an inspection in Raleigh

A crawl space inspection is a reliable way to find the moisture source and decide what comes next. Call Crawl Space Ninja of Raleigh at (919) 533-5666, or use the contact page, to schedule a Free Inspection. If you are comparing companies, see how to choose a crawl space encapsulation contractor in Raleigh and the Triangle.

Sources